Touch-up repairs to swimming pools without draining the water (#1 use - CLICK HERE)

Emergency underwater boat repairs

Repair reefs, docks, sheet piling

tags applied to turtles, etc.



The Internet presence of:

Progressive Epoxy Polymers, Inc.

Over 20 years of operation. Over a dozen epoxy linked web sites and hundreds of pages of information. We are the largest and best source for epoxies, coatings, and related information, help and advise.


Member: NACE (National Assoc. of Corrosion Engineers), SSPC (Soc. of Protective Coatings)

"Professionals helping Professionals since 1994"

return to opening page

We offer a range of different epoxies that can be applied underwater (a rather unique property of a limited number of epoxy products. By far, our primary users are people purchasing 1.5 quart units of our WATER GARD 300 epoxy for personal swimming pool small area touch up and minor repair (not practical to paint the entire pool) without draining the water. Our WET DRY 700 underwater epoxy paste fixes darn near everything, above or below the waves! We are one of the last vendors of the original underwater epoxy SPLASH ZONE A-788. Mix our thin LOW V epoxy with sand and make underwater cement.


Commercial Aquarium repair



Splash Zone A-788 -- Wet Dry 700 -- Corro Coat fc2100A -- Water Gard 300

(plus our thin MARINE EPOXY like Low V epoxy)

Third Party article about underwater epoxies

Swimming Pool Chips - Stains and Cracks (Water Gard 300 epoxy)


Pool chips, stains and cracks can easily and cheaply be repaired with our Water Gard 300 Underwater epoxy paint (colors white or light blue). If you have a chip or stain or crack call us immediately at 603 435 7199. If you leave the damaged area alone, it will only get worse, leading to a very $$$$ contractor repair and the draining and refilling of your pool.

Available in 48 oz kits and 3 quart kits - 3-quart units are twice as much epoxy as the 48 oz kit for about 60% more $$  (BUY HERE)

Customer Feedback


Underwater Swimming pool touch-up with Water Gard 300 epoxy

The most popular application for our best selling underwater epoxy paint

You will not find this at any pool supply store!


Hi Paul. This is Dave from San Angelo, Tx. As I told you before, the underwater applied epoxy (Water Gard 300) worked great. I recommend you send your product info to all pool companies and pool supply retailers or if you can find out who has fiberglass pools and send them info if they ever need it. Thanks 6/16


I'm not the kind of person to give feedback on products or services but I must comment on the Water Gard 300 product. I purchased a home 4 years ago with a fiberglass pool and 2 years ago it started to significantly chip. Long story short, after significant analysis from multiple experts, it turns out that the pool had ruptured and was repaired. Unfortunately the repair person applied the fiberglass topcoat incorrectly and it is all coming off. Luckily the pool is structurally sound, just very ugly to look at. Estimates to fix it range from $8,000 to $25,000 and no one would guarantee that the entire pool would not collapse after draining the water which would require an entire replacement.

After a year of searching, and countless attempts at other solutions, I came across your product. This product is amazing! I still can't believe it's even possible to apply a paint (sorry epoxy) underwater. I used a 14 foot extension pole with a roller to apply the paint/epoxy. The most time consuming part was mixing parts A and B together. I purchased the 3 gallon size but since I was working alone I mixed small batches since the pot life was short. For roughly $350 my pool looks brand new! I can't thank you enough. I've attached some before and after pictures.

Thanks again,


8/14 -- My name is T..R... and I live in Las Vegas, Nev. I have a beautiful custom pool and I noticed a small area on the side wall of my pool. I took a wire brush and tried to remove the dark colored spot. Unfortunately I rubbed too hard and made it worse, much worse.

I contacted 10 different pool companies and each of them informed me that I would need to drain the pool to repair the spot that was getting larger by the day. Draining a pool with 28,000 gallons during the summer is bad enough, but fixing the plaster that had been rubbed down to the Gunnite is very expensive. I needed a quick fix and there did not seem to be one! Well, I was wrong.

I discovered a man named Paul Oman at on the internet when I searched for (plaster underwater repair) and to my amazement he told me about an epoxy that you mix in a ratio of 2 to 1 (Water Gard 300 - available in white or light blue).

It is human nature to be skeptical. Wow, this product is incredible! It repaired the spot perfectly for less than $100 and not the thousands that I would certainly have had to spend to repair the side of my pool.

Once last thing, Paul sent me the white at my request. I mixed a light blue paint from a hobby store and my pool looks great. This product is perfect and it is for real. Do yourself a favor and don’t listen to the pool guys, they want your business and that adds up to big bucks!

Thanks again Paul for helping me solve this problem. --- T..R..

Dear Paul, 

Just wanted to let you know that the white water guard 300 I purchased to repair my fiberglass swimming pool  underwater worked great!!! Just what I was looking for. The product covered more area than I expected, but I may be ordering more!!! Did test spots on shallow area and steps, and It looks like it did 31 years ago. Going to tackle the deep area next. Tested using a brush and a roller. The paint brush worked a little better for me. Thank You So Much!! I will share with others!  ----- Helen from LA.

All I can say is thank you....

I have a small fiberglass in-ground pool with visible bare spots. With the cost of repainting (estimates of $5000) and risk of the pool popping out of the ground if it was emptied to be repainted I looked for alternatives and found y

Used the Water gard 300 you sent. I followed your advice and the instructions provided. There were 3 or 4 bare spots. One was about 2 feet long and down to the fiberglass very ugly. The epoxy you recommended for the job was so easy to use. Saving me money. Thank you so much

Virginia -- Key West (7/17)

Wet Dry 700 Epoxy


The only Epoxy Putty reinforced with Kevlar (tm) micro-fibers and feldspar ceramic for an incredible hard and tough product. This is a hard working epoxy paste (about as thick as wall mud or cake icing)

Our second most popular underwater repair putty/paste



COMMON APPLICATIONS: Patching holes voids and leaks, underwater repairs (pools, boats, tanks), rot repair, gluing, pipe wraps, vertical/overhead fiberglass repairs, marine blister repair

Customer Feedback - WET DRY 700 epoxy paste

You will not find this at any other epoxy site!


Jeff (1/2013)

I cannot believe how incredible this Wet Dry 700 is. It's revolutionary. The original repair to my storm shelter would have lasted years if the shelter would just stop shifting around in the ground. DON'T STOP SELLING THIS STUFF.

 (10/2013)     Comments: Returning  -  Underwater boat repair

My third or fourth order and am still quite pleased with the result. It has many uses above and below the water line.

"I'll stick with my original plan to use the Wet Dry 700 since it's a nuclear reactor application, and I know of two other reactors that have successfully used it" 12/16

"The Wet Dry 700 epoxy paste worked great for patching for the rotted dingy transom. I cut out the rot, fitted new oak pieces, and patched with the Wet Dry 700 epoxy. Easy as pie." -- John 1/15

 Corro Coat FC 2100A epoxy paint


Corro Coat FC 2100A - This is the same new generation of underwater epoxy coatings as the Wet Dry 700 above. A brushable/rollable epoxy maintenance coating containing both kevlar (tm) and feldspar ceramic. Produces a nearly smooth finish. Non-hazmat to ship and can be shipped worldwide. Can be resold and private labeled. Color: light gray. Mix ratio is 2 to 1 by volume. Sold in 1.5 gallon units and 15 gallon units. This epoxy has its own web page.

Best described as "Gray Apple Sauce" in texture and thickness. Often used on sheet piling, repairing leaking home basements, dams and drainage channels, pits and sumps. Find in our FAVORITES catalog.



1)  application of underwater epoxy paint (photograph) ----- uwpaint.html

2)  underwater repair epoxy saves sinking yacht  ----- cs_boat.html

3)  history of underwater paint putty epoxy ----- uwhistory.html

4)  description / buy links to underwater epoxy paint putty adhesive  ----- under4u.html

5)  epoxy and non epoxies that can be used  (not applied) underwater  ----- immerse.html 

Find these products on our FAVORITES PAGE ----- favorites4u.html

(including links to purchase - or call 603 -435 7199)

EMERGENCY UNDERWATER BOAT REPAIR  ---  There is an amazing book written about using our underwater epoxies to repair and then raise a sunken sailboat in the Pacific Atoll island. ESCAPE FROM HERMIT ISLAND. Note that these days we can no longer ship these epoxies by air, so order your EMERGENCY EPOXIES before you sail off into the sunset!


underwater epoxy


BUY - GOTO ONLINE STORE #1 --  (CLICK HERE) FOR PRIMARY "KING CART"  ONLINE STORE  a King Cart (tm) 3rd party store - has all our products

BUY FROM  OUR SIMPLE STORE #2  --  (CLICK HERE)  EPOXYUSA.COM SECONDARY ONLINE STORE  has just our primary, non-solvent, non-restricted products

Search our site - Google Site Search


Need More?


Ask Professor E.Poxy